RV Inspiration

DIY: How to Add (Removable) Walls to Shower Shelves

My RV came with shelves in the shower that, while they looked nice and are very handy when the RV is parked, I knew would be totally useless for storage when the RV was in motion.

Green Cup

Materials needed: 1. plexiglass 2. silicone “h” type shower door seal 3. clear acrylic double-sided mounting tape

Step 1: 

Cut one piece of plexiglass for each shelf to the length of the widest part of your shower shelves and whatever height you prefer.

Step 2:

Cut a length of silicone shower seal for each edge of the plexiglass equal to the height of the glass.

Step 3:

Cut and affix 1″ mounting tape to the wide, flat surface of the shower seal.  Do not remove the backing yet.

Step 4:

Cut 1″ mounting tape lengthwise to make it 1/2″ wide and affix it to edges of the plexiglass pieces.  Do not remove the backing yet.

Step 5:

Remove the backing from the tape along the edges of the plexiglass and attach the glass to the shower seal along the inside of the short side of the “y”.

Step 6:

Remove the backing from the tape along the wide, flat side of the shower seal.

Step 7:

Leaving about 1/2″ of clearance to allow water to drain out, press the plexiglass into the corner of the shower, bowing the glass slightly to create pressure against the wall along the edges.

Swipe Up to learn How to Add (Removable) Walls to Shower Shelves

For More Posts Like This Visit RV Inspiration